/ Adherence and friction tests

Adherence and friction tests

During this test, an adhesive band fixed to the coating is pulled at a constant rate (cm/min) by an increasing force until a failure occurs. The adhesion force is then obtained as a function of time. This apparatus is also useful to measure the frictional coefficient.

Uses

-Measure the adhesion force

-Determine the frictional coefficient

 

 

 

Force : 0.1 – 50 N

Manufacturer : Instrumentors

Model : SP-103B

S'inscrire à notre infolettre mensuelle et/ou suivre notre flux rss.